Short Cord Instructions - Kalorik CMM 39732 Mode D'emploi

Fax +32 2 359 95 50
Caution: Special Safeguards
Blender attachment
1. Always unplug the appliance before changing accessories or
approaching parts which move when in use.
2. Never touch the blades while the machine is plugged in.
3. Never blend hot oil or fat.
Chopper
1. Care is needed when handing the cutting blade, especially
when removing the blade from the bowl, emptying the bowl and
during cleaning. Do not touch the sharp blades!
2. Always remove the chopper blade before emptying the bowl.
3. Never remove the cover before the blade has completely
stopped.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG INSTRUCTIONS
This appliances is equipped with a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug will fit
into the polarized outlet only one way. If the plug does not properly
fit into the outlet at first, reverse it. If it still does not fit, contact a
competent qualified electrician. Do not attempt to modify the plug in
any way.

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord.
Extension cords may be used if care is exercised in their use.
The electrical rating of the extension cord should be at least that
•
of the appliance. If the electrical rating of the extension cord is
too low, it could overheat and burn.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity. Print only what is inside the frame.
3
Assembly page 3/32
CMM 39732 - 120501