Safety Precautions; Loading The Rotor - Ibx MC7000 Mode D'emploi

1. Safety Precautions

The precautions described in the User Manual are carefully developed with intent to cover all the
possible risks. Please read them carefully before operating the centrifuge.
 Ensure that only trained staff works with the instrument.
 Never use the centrifuge in any way other than that specified in these instructions manual.
 Never place your hands in the rotor area unless the rotor has completely stopped.
If something abnormal occurs during the operation of this centrifuge, please stop it immediately
and contact your supplier/manufacturer.

2. Loading the Rotor

Line up the rotor with the motor shaft. Press the rotor down to secure it with the shaft.
Please use your both hands to load the rotor.

3. Operation
 Open the lid and press the ON/OFF switch located at the back of the unit.
 Symmetrically load the centrifuge tubes on the rotor.
 Close the centrifuge's lid to begin running.
 Switch off, the rotor will gradually stop.
 Open the lid and do not remove the samples until the rotor completely stops moving.
3