Festool SYSROCK BR 10 Manual D'instructions page 15

such as switching adapter is
damaged, liquid has been spilled,
the device has been exposed to
rain or moisture, does not oper-
ate normally, or fell down.
13. To Reduce the Risk of Fire or Elec-
tric Shock, Do not Expose This Ap-
pliance To Rain or Moisture.
14. The Shock Hazard Marking and
Associated Graphical Symbol is
provided at the bottom of the de-
vice.
15. The device shall not be exposed to
dripping or splashing. No objects
filled with liquids may be placed
on the device.
16. The switching adapter should not
be removed far from the radio,
and remain easily accessible so
that during an emergency, the
power source can be easily re-
moved.
17. Where the MAINS plug or an ap-
pliance coupler is used as the dis-
3 Technical data
Radio
Power requirements
18. The battery pack shall not be ex-
19. To prevent possible
CAUTION: To reduce the risk of elec-
tric shock, do not perform any main-
tenance other than that detailed in
the operating instructions unless you
are qualified to do so.
WARNING! Warranty becomes void
once the radio housing has been
opened or any modifications or al-
terations to the radio have been
made!
switching adapter
battery pack
connect device, the disconnected
device shall remain readily oper-
able.
posed to excessive heat such as
direct sunlight, fire etc.
For more information read the
safety instructions provided with
your battery pack.
hearing loss, do not
listen at high volume
levels for extended pe-
riods of time periods.
SYS ROCK BR 10
Output: DC 19V/1.2 A
center pin positive
recommended: 18V
BR 10
GB
10.8 -18V
15