Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.15.2
2.15.2
2.15.2
Installing Windows
Installing Windows
Installing Windows
2.15.2
2.15.2
Installing Windows
Installing Windows
RAID Functions
RAID Functions
RAID Functions
RAID Functions
RAID Functions
If you want to install Windows
SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
system.
®
Insert the Windows
drive to boot your system, and follow the instruction to install Windows
Windows
®
Vista
TM
64-bit OS on your system. When you see "Where do you want to
install Windows?" page, please insert the ASRock Support CD into your optical drive,
and click the "Load Driver" button on the left on the bottom to load the NVIDIA
®
drivers. NVIDIA
RAID drivers are in the following path in our Support CD:
.. \ I386 (For Windows
.. \ AMD64 (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
NOTE. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please set
the RAID configuration by using the Windows RAID installation guide in the following
path in the Support CD:
.. \ RAID Installation Guide
2.16
2.16 Untied Overclocking T
2.16
Untied Overclocking Technology
Untied Overclocking T
Untied Overclocking T
2.16
2.16
Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Please refer to the warning on page 7 for the possible overclocking risk before
you apply Untied Overclocking Technology.
3 4
3 4
3 4
3 4
3 4
ASRock
Vista
Vista
Vista
Vista
Vista
TM
TM
TM
TM
TM
®
®
TM
Vista
or Windows
Advanced screen
®
TM
Vista
/ Windows
TM
®
TM
Vista
/ Windows
Vista
®
Vista
TM
OS)
®
Vista
TM
64-bit OS)
®
TM
Vista
/ Windows
®
Vista
TM
/ Windows
®
Vista
echnology
echnology
echnology
echnology
ALiveNF5SLI-1394
/ Vista
/ Vista
/ Vista
64-bit With
64-bit With
64-bit With
/ Vista
/ Vista
64-bit With
64-bit With
TM
TM
TM
TM
TM
®
TM
Vista
64-bit on your SATA /
IDE Configuration.
®
TM
Vista
64-bit OS on your
64-bit optical disk into the optical
®
Vista
®
TM
Vista
64-bit optical disk into
TM
64-bit on IDE HDDs and want to
Motherboard
TM
/
®
RAID
Publicité
Table des Matières
