Technical Data - Martin Yale paper monstser LA4 397 Instructions D'opération

GB
OPERATION GUIDE
4. The laminating pouch will pass through the
laminator and exit at the rear of the lamina-
tor.
Remove the laminating pouch when it has
stopped moving.
5. Slide the switch to OFF after use.
6. Disconnect the laminator from the power sup-
ply outlet.
This laminator is equipped with an anti-blockage
function to resolve any blockage of the laminat-
ing items during laminating.
1. Slide the switch to OFF and disconnect the
laminator from the power supply outlet imme-
diately when its jammed. Cool the laminator
down briefly.
2. Slide and hold the anti-blockage switch (ABS)
on the back of the laminator as in the direc-
tion indicated by the arrow sign, and pull the
jammed item completely out from the lamina-
tor opening.
PROBLEMS
1. When the Machine is in blue indicator, the lam-
inating material doesn't come out from the exit
after inserting for a long time, and there is noise
as well as bad smell coming from the machine.
2. The power indicator is not on.
3. If other problems happen, pls plug off the machine and send it to maintenance centre.
MALFUNCTION
DISPOSING OF THE MACHINE:
Dispose of the machine in an envi-
ronmentally sound fashion at the
end of its usefull service life. Do not
dispose of any of the parts included
in the machine or its packing with
household trash.
LAMINATOR
1. After using the machine, pls plug off the ma-
chine and pls don't cover up the small holes
so as to let out the heat.
2. Don't place heavy ore sharp materials onto
the machine in order not to distort or damage
the machine.
3. Before and after laminating, you may insert
1 pc of white paper so as to take out the pos-
sible dust in the roller.
CLEARING A BLOCKAGE
Legend
1 ABS Switch
BRIEF PROBLEM SHOOTING
REASONS
1. Improper use of laminating film, such as: une-
ven laminates edges on the film which makes the
roller stuck with glue; you reserve too much area
in the front of the film; the laminated thickness
has exceeded the max. laminating thickness.
2. There is a barrier at the rear exit.
1. The machine is not yet plug in;
2. The power switch is not switched on;
3. The electric current fuse has been destroyed.
Description
XXXXX
Note: For orders of special accessoires and spare parts, please contact your dealer.
Power consumption:
Max. laminating width:
Max. laminating thickness:
Preheating time:
Working time:
Laminating speed:
Net Weight:
Dimensions (L*W*H):
5
MAINTENANCE
4. Don't clean the surface of the machine with
corrosive solvent. Don't drop any water inside
the machine when cleaning the machine with
a wet cloth, otherwise, it may led to problems
in PCB.
5. If the machine is unused for a long time, pls
cover up the machine with a plastic or cloth to
get rid of the dust.
1
Figure 4
Please switch off the power and unplug the ma-
chine, pull out the jammed films from the insert;
if there is still any problem, please turn to profes-
sional for maintenance.
Pls check and make sure if the machine is plug
in or not and if the power switch is switched on
or not, or pls ask the maintenance personnel to
check the circuit; otherwise, pls send the ma-
chine to maintenance centre.
SPECIAL ACCESSOIRES

TECHNICAL DATA

220 V - 240 VAC, 50 Hz 1.1A
230 mm
(125 x 2) mic
3–5 min.
30 min. on, 30 min. off
200 mm/min.
0.95 kg
385 x 110 x 66 mm
LA4
SOLUTIONS
Order-No.
xxxxx