SOLAC TE7803 Mode D'emploi page 19

screen will display the average
for the last 3 readings "
When holding the memory button
•
(3) the user can view the data
from the most recent date to the
oldest date. Each memory group
can store a maximum of 60 rea-
dings.
ERASING THE MEMORIES:
To erase the memories, press
•
and hold the memory button (3)
and SET button (4) at the same
time for 3 seconds while using
the read function. The display will
show "dEL ALL" message.
Press "SET" to confirm deleting.
•
The monitor will display "dEL+
donE" and then turn off.
If you don't want to delete the
•
records, press "START/STOP" to
escape.
AUTO-DISCONNECTION FUNC-
TION (STAND-BY):
For the purpose of saving ener-
•
gy, the appliance goes to self-dis-
connection mode 1 minute after
process has finished, if the user
has not performed any action
with it during this period.
ONCE YOU HAVE FINISHED
USING THE APPLIANCE:
Turn the appliance off, using the
•
on/off switch.
Remove the batteries from the
•
" (16).
appliance if you are not going to
use it for some time.
Clean the appliance.
•
PRACTICAL RECOMMENDA-
TIONS:
Avoid eating, smoking and in-
•
tensive activity in the 30 minutes
before taking the measurement.
Leave at least 1 minute between
•
each reading to relax your blood
flow in the arm.
EN