Amazon Basics B01BGY010C Mode D'emploi page 9

Setup
Step 5:
Securing to a Floor or Wall
Select a stable, dry and secure location for your safe.
If bolting to a wall, make sure that your safe is resting on a supporting surface (such as the floor or a
shelf). Do not bolt your safe to both the floor and wall.
Place the safe on the selected location. Use a pencil to mark the mounting holes on the floor or wall.
Move the safe and drill 2-inch-deep mounting holes (~50 mm) using a 12 mm drill bit.
Move the safe back in place, align the mounting holes to the openings in the safe. Insert the
expansion bolts (included) through the holes and into the mounting holes and tighten them securely.
BGY010C-AmazonBasics-IM-V03 (Multi).indb 9
9
9/8/16 3:49