Ozone Oxygen2 Manuel D'utilisation page 12

CARE AND MAINTANENCE
The Oxygen2 will last you many flights and many years if looked after
correctly. To keep your harness clean and airworthy, please note the
following:
• Avoid excessive exposure to UV, heat and humidity.
• Pack the harness dry and store in a cool dry place.
• Never drag your harness.
• Keep you harness clean of dirt, oils and any corrosive substance.
• Use water and a cloth to clean.
Inspection
For safety, routine inspection of all of your equipment is vitally impor-
tant. Ozone recommends a service interval of 12 months in addition
to the usual pre flight checks.
For inspection, visually check the stitching, webbing and all structur-
ally important areas. Pay particular attention to the webbing around
the hang point area under the karabiner, as this is where abrasion is
most likely.
If you find any damage or if you are in any doubt make sure the har-
ness checked by a professional.
MATERIALS
MATERIALS
Harness Webbing
Gurth and Wolf, 59036/25 25mm Polyamide, 2000 kg.
Harness Material
Oztec Dominico
Buckles
Austri Alpin FC25B (leg and Chest strap),
Austri Alpin T-Cobra (Chest strap).
Pulleys
Austri Alpin FL32A
10