SEVERIN KM 3873 Mode D'emploi page 9

Masquer les pouces Voir aussi pour KM 3873:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
and allow the motor to cool down (10 Min.)
before switching it on again.
Before using for the fi rst time
Before initial use, the grinding mechanism,
grinding ring, bean and collection containers
should be cleaned as described in the section
General care and cleaning.
Operation
Adjusting the grind level
Th e
adjustment
adjustment of the coarse/fi ne setting in
several steps. Depending on the type of
coff ee and the preparation method used,
the following information on grinding
levels may be helpful
Adjustable grind settings:
-
1
for espresso machines
-
2-7
for automatic coff ee makers
-
8-10 for brewing when no machine is
used
Caution:
To prevent beans from getting
caught in the grind mechanism and
causing possible jamming of the motor,
always set the grind level fi rst before
putting the beans into the container. If
the beans have already been put in, the
grind level should only be changed while
the motor is running.
Turn the bean container until the arrow
on the container is aligned with the
desired setting.
Loading the coff ee beans
Remove the lid of the bean container.
Load the beans inside and replace the lid.
Th e maximum capacity of the bean
container is 150 g.
Selecting the right quantity
Use the quantity selector knob to set the
amount of ground coff ee desired. Any
amount from 2 to 10 cups can be processed
in a single cycle. However, the quantity-
per-cup information on the selecting
knob is approximate only. Since diff erent
types of coff ee as well as miscellaneous
control
allows
for
factors such as the size of the cups and
your personal preference may require a
diff erent setting, we recommend that you
try out whatever suits your own personal
taste.
Th e maximum capacity of the collection
container is 100 g. Caution: Always make
sure you empty the collection container in
good time, as an over-full container may
cause a blockage inside the appliance.
Grinding the beans
Make sure that the collection container
lid is properly fi tted before attaching the
container itself to the main unit.
Insert the plug into a suitable wall socket.
Press the start button.
Th e grinding process begins and stops
automatically once the selected amount of
ground coff ee has been produced.
Th e process can be stopped at any time by
pressing the start button again.
Once grinding has fi nished, remove
the plug from the wall socket and wait
until the motor has come to a complete
standstill before removing and opening
the collection container.
Note: To ensure optimum coff ee fl avour,
only the required quantity of beans should
be ground immediately before brewing.
Any excess ground coff ee should be stored
in a suitable air-tight container.
General care and cleaning
Before cleaning the appliance, always
remove the plug from the wall socket
and wait until the motor has come to a
complete standstill.
To avoid the risk of electric shock, do not
clean the housing or the power cord with
water, and do not immerse them in water.
Th e housing may be wiped with a slightly
damp, lint-free cloth. Wipe thoroughly
dry aft erwards.
Do not use abrasives, harsh cleaning
solutions or hard brushes for cleaning.
Take off the collection container and its
lid, and clean them with a mild detergent.
Ensure they are thoroughly dry before
9

Publicité

Table des Matières
loading

Table des Matières