Technical Specifications; Safety Instructions For Work With Gas Chain Saws - Spark PROFESSIONAL TV 3840 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
II - Technical specifications
model:
▪ Engine Displacement
▪ Maximum Shaft Brake Power
▪ Usable cutting length
▪ Cutting Length
▪ Chain Pitch
▪ Chain Gauge
▪ Idle Speed
▪ Speed at Max power
▪ Fuel Capacity
▪ Fuel Consumption
▪ Oil Capacity
▪ Anti Vibration
▪ Sprocket Tip Bar
▪ Chain Brake
▪ Clutch
▪ Automatic Chain Oiler
▪ Low Kick-back Chain Type: (Oregon) / (Carlton)
▪ Type of Guide Bar: (Oregon) / (Mercury)
▪ Mean Braking Time at Racing Speed
▪ Weight (Without guide bar and chain)
▪ Weight
▪ Sound Pressure Level
▪ Sound Power Level
▪ Guarantee Sound Power Level
▪ Vibration
III - Safety instructions
for work with
gas chain saws
WARNING: When using gas tools,
basic safety precautions, including the
following, should always be followed to
reduce the risk of serious personal injury
and/or damage to the unit. Read all these
instructions before operating this product and
save these instructions.
1. Do not operate a chain saw with one hand!
Serious injury to the operator, helpers, by-
standers, or any combination of these per-
sons may result from one-handed operation.
A chain saw is intended for two-handed use.
2. Do not operate a chain saw when you are fa-
tigued, under the influence of drugs, alcohol
or medication.
3. Use safety footwear, snug-fitting clothing,
protective gloves, and eye, hearing and head
protection devices.
Original instructions
91PJ054X / N150C-K-054E
160SDEA318 / 9040-310108
4. Use caution when handling fuel. Move the
chain saw at least 3 m from the fuelling point
before starting the engine.
5. Do not allow other persons to be near when
starting or cutting with the chain saw. Keep
bystanders and animals out of the work area.
6. Do not start cutting until you have a clear work
area, secure footing, and a planned retreat
path from the falling tree.
7.
Keep all parts of your body away from the saw
chain when the engine is running.
8. Before you start the engine, make sure that
the saw chain is not contacting anything.
9. Carry the chain saw with the engine stopped,
the guide bar and saw chain to the rear, and
the muffler away from your body.
10. Do not operate a chain saw that is damaged,
improperly adjusted, or not completely and
securely assembled. Be sure that the saw
chain stops moving when the throttle control
trigger is released.
11. Shut off the engine before setting the chain
saw down.
12. Use extreme caution when cutting small size
brush and saplings because slender material
may catch the saw chain and be whipped to-
TV 3840
38 cm
3
1.4 kW
37 cm
40 cm
9.53 mm (3/8")
1.27 mm (0.05")
3100±10% min
-1
11000 min
-1
296 cm
3
800 g/kWh
180 cm
3
Yes
6 Teeth
Yes
Yes
Yes
0.12 s
5.1 kg
5.88 kg
106 dB (A)
111 dB (A)
116 dB (A)
12 m/s
2
3
EN

Publicité

Table des Matières
loading

Table des Matières