Use - Imetec REGOLABARBA GK 618 Mode D'emploi

batteries.
• If the appliance is not to be used for a prolonged period of time, it
must be charged for 12 hours before putting it away.
WARNING! DO NOT use this appliance if
there are visible signs of damage.
WARNING! DO NOT use the appliance if
the blades are damaged or do not work
properly.
Make sure that your beard or hair is dry and clean, with no residue of
hairspray, mousse, gel or other hair products, and then brush in the
direction of growth, untangling any knots.
WARNING! Switch the appliance off
before changing any accessories.
CONNECTING/DISCONNECTING THE ACCESSORIES
• To insert an accessory (5 or 6 or 7): hold the appliance in one hand,
position the desired head and push it down with force until you hear
a "click".
• To remove an accessory (5 or 6 or 7): press the central part of the
head upwards using your thumb, then remove it from the appliance.
TRIMMING YOUR BEARD
• Position the precision head (8 or 9) on the appliance when it is off,
making it slide onto the head (5).
• Slide the comb (8 or 9) at the desired cutting height.
• It is recommended to clean the blade and comb with the provided
brush (13) after each use to prevent the accumulation of residual

USE

24
EN