Technical Data; Parts; Assembly Directions; Declaration Of Conformity - Jysk FORSSA 711-177-1021 Instructions De Montage

4. OPERATION
UP / DOWN operation :
"PUSH button" and "UP / DOWN button" must be pressed SIMULTANEOUSLY.
5. MAINTENANCE AND DEFECTS
– The table does not require any maintenance by usage as described in chapter 2 in the directions for use.
– The table is only to be maintained with a damp cloth.
– In the event of the occurrence of jarring sounds during operation, STOP using the table.

6. TECHNICAL DATA

Frame, materials :
Weights ( frame ) :
Width :
Depth :
Height :
V ( speed ) :
Duty cycle :
Operation :
Voltage :
Consumption :
Standby consumption :
Max. working load ( on frame ) :
Above specifications may vary depending on local temperature, humidity and input voltage.

7. PARTS

See page 6.

8. ASSEMBLY DIRECTIONS

See pages 7-9.

9. DECLARATION OF CONFORMITY

We hereby declare, under our sole responsibility that the following products :
– Sit and stand table product type 711-177-1021
is in accordance with :
– Directive 2006 / 42 / EF of The European Parliament and of the Council of 17 May 2006 on machinery
and on changes of directive 95 / 16 / EF
With reference to the above please be aware that :
– the sit and stand table is considered a machine and
– the sit and stand table may not be used until it has been assembled and installed according to the instructions.
UP / DOWN
button
Steel, powder lacquered
20 kg
160 cm
80 cm
68 - 120 cm
~ 25 mm / sec. – depends on load
10 % by 50 % of max. working load on frame or max. 2 min. continuously
Micro switches
|
100 -240 VAC 50 / 60 Hz
80 Watt
< 0,15 Watt
70 kg
5/12
PUSH button