APLIC 303511 Manuel De L'utilisateur page 10

4. Assembly
According to the StVZO §67, lighting devices must be installed properly and firmly
and be ready for use at any time. Lighting devices should not be covered.
1.
2.
3.
A
Assemble the headlight as shown on the handlebar and the tail light on the rear
part of the frame.
4.1 Headlight
Open the clamp for mounting the headlight and fix it accordingly. The headlight
can be removed from the bracket and replaced easily after assembly thanks to
the snap lock mechanism.
To do this, press the lever (A) down and remove the light as shown in the figure
above.
10
English