General Operations - Sylvania SB378W Mode D'emploi

1. Connect the DC 16V, 1.5A Adapter to the DC IN jack on the Main Unit. Plug the Adapter into
the AC outlet with AC100~240V;50/60Hz. The mode indicator on Main Unit will light up and
turn RED.
2.
Connect the DC16V, 1.5A Adapter to the DC IN jack on the SUBWOOFER. Plug the Adapter
into the AC outlet with AC100~240V;50/60Hz. The power indicator on the SUBWOOFER will
light up and turn RED.
3. Press and hold the Standby/Source button on the Main Unit or press the
control to power on the Main Unit.
4. After a few seconds, the Main Unit will be connected with SUBWOOFER automatically, the
pairing INDICATOR on SUBWOOFER will be solid BLUE.
IMPORTANT NOTE: If the pairing INDICATOR on the SUBWOOFER is off, it means the
Main Unit is not connected with the SUBWOOFER successfully. Please operate as the
steps below:
A: Press and hold the SB Pair button on the Main Unit for 3-5 seconds.
B: Press and hold the STANDBY button on SUBWOOFER to power off, then press the
STANDBY button on SUBWOOFER to power on again, the pairing INDICATOR on
SUBWOOFER will blink several times and then turn off, it means the SUBWOOFER
is connected with Main Unit successfully.
C: Press the SB PAIR button on the Main Unit, the pairing INDICATOR on the
SUBWOOFER will be solid BLUE.
5. Press the
button on remote control or press the Standby/Source button on the unit
repeatedly to switch to the desired mode. Or press the AUX, OPTICAL, BT, LINE IN, USB
button on remote control to switch to desired mode directly, the indicator on front of the unit
will turn to:
Blue...........................................................................................................Bluetooth Mode
Green...........................................................................................................LINE IN Mode
Purple...................................................................................................OPTICAL IN Mode
Indigo (blue+green)......................................................................................AUX IN Mode
Pink Green (red+green+blue)............................................................................USB Mode
6. During Playing:
~ Press the Vol+ or Vol- button on the unit or press the + or - button on remote control
repeatedly to adjust volume.
The LED will flash when the volume is increased or decreased. When the volume
reaches the maximum level, The LED will be solid and a beep tone will be heard.
~ Press the
button on remote control to turn off sound, the mode indicator on the
Main Unit will blink, press this button again to resume.
~ Press the MUSIC button on remote control to turn to MUSIC sound effect mode.
~ Press the TALK button on remote control to turn to TALK sound effect mode.
~ Press the MOVIE button on remote control to turn to MOVIE sound effect mode.
~ Press the STANDARD button on remote control to turn to normal sound effect mode.
7. When finish listening, unplug the adapter of the Main Unit and the Subwoofer from AC outlet.

GENERAL OPERATIONS

11
button on remote