Maintenance; After Sales Service; Declaration Of Conformity - ELC ALR3002M Manuel D'instructions

Connect the load on the sockets [5].
Control the voltage regulation by the enlightened green LED and the current consumed by the display [4].
Constant current use
Adjust voltage to max or to a max desired value by [8] [9].
Select the desired current range by [7] : 25 mA, 250 mA or 2,5 A.
Do a short circuit on the sockets [5] and adjust the current to desired value by [6] on the display [4].
Take off the short-circuit and connect the load on sockets [5].
Control the current regulation by the enlightened red LED and its value on the display [4].
5.2.3 Precautions
Always adjust the power supply before connecting the load.
Connect the load with sufficient diameter (1mm²) insulated cord.
Disconnect the load before switching off the ALR3002M.
Avoid dust for the storage of the instrument.
A temperature control circuit controls the fan, it works only when necessary.

6 - MAINTENANCE

No particular maintenance is required for this instrument. Avoid dust, humidity, shocks : your instrument will
be grateful to you for that. For cleaning, please use a smooth duster :
If indicator does not light up when plugging, check :
- if ON/OFF switch is activated
- the connection to the main input voltage
- Main voltage presence

7 - AFTER SALES SERVICE

During ONE YEAR, spare parts and workmanship are guaranteed. This guarantee does not apply to instrument presenting
defects or failures caused by an improper use. Return expenses are borne by the client. Only devices returned with
a dated purchasing invoice can be recovered by the guarantee. Any intervention carried out by unauthorized persons
or organizations, shall void the guarantee.

8 - DECLARATION OF CONFORMITY

according to ISO/IEC guide 22 and EN 45014
Manufacturer : ELC
Address : 59, avenue des Romains 74000 Annecy FRANCE
declares the product
Name : REGULATED POWER SUPPLY
Type : ALR3002M
conformable to the following specifications :
Safety : EN 61010-1: 2001
Class II, overvoltage category II, pollution degree 2.
EMC : EN 61326-1:1997 + A1:1998 + A2:2001
- EN 55022
- CEI 61000-4-2
- CEI 61000-4-3
- CEI 61000-4-4
- CEI 61000-4-5
- CEI 61000-4-6
- CEI 61000-3-2
Further informations :
The product above is conformable to the requirements of the «Low voltage» directive 73/23/CEE, of the
«Electromagnetic compatibility» directive 89/336/CEE and of the 93/68/CEE directive.
Annecy, on September 15th 2004
H. CURRI, Manager
- 10 -