JB Systems Pm4.2 MEDIAMIX Mode D'emploi page 9

ENGLISH
OPERATION
MEDIA PLAYER
Organizing the USB-memory
 The maximum size of the USB-memory is limited to 16GB.
Maximum number of tracks is limited to 2000.
 The USB-memory should be formatted in FAT32 file system,
the NTFS file system is NOT supported.
 The USB-memory can have a root with subfolders. Subfolders
in subfolders are not supported.
 Tracks are sorted alphanumerically on the first 8 characters of
each track name.
 Loading the contents of a USB-memory takes a little time, please be patient with bigger drives.
Jingle / commercial player
The PM4.2 allows playback of up to 3 jingles or commercials, perfect for use in shops to announce special
actions, promotions etc.
To make things work, certain rules for saving the files should be followed:
 Create a folder with EXACTLY this name: Jingles (Capital letter for "J" !)
 In this folder you will save the MP3 files that are called the jingles or commercials. Also the naming of
these files is very important:
 Standard naming = jX_YY.mp3
o The X is the number of the jingle / commercial, ranging from 1 to 3.
o The YY is the number of minutes "music playback" (media player or radio) before the commercial
starts playing.
Examples:
In the "Jingles" folder we have 3 commercials with these names: j1_20.mp3 ~ j2_10.mp3 ~ j3_06.mp3
o MANUAL PLAYBACK:
These commercials can be played at any moment simply
by shortly pushing one of the 3 JINGLE-buttons (17).
o SCHEDULED PLAYBACK:
Start scheduled playback by pushing the JINGLE 1 button (17)
for at least 2 seconds: the "Scheduled Jingle Play LED" (18)
will be lit while the following happens:
o Music is imuted while "Jingle 1" starts playing.
o After playback of "Jingle 1", music starts playing again.
o 10 minutes after "Jingle 1" was started, the music mutes
again and "Jingle 2" starts playing.
o After playback of "Jingle 2", music starts playing again.
o 06 minutes after "Jingle 2" was started, the music mutes
again and "Jingle 3" starts playing.
o After playback of "Jingle 3", music starts playing again.
o 20 minutes after "Jingle 3" was started, the music muted again and "Jingle 1" starts playing.
This loop goes on until you stop scheduled playback again by pushing the JINGLE 1 button (17)
for at least 2 seconds: the "Scheduled Jingle Play LED" (18) will turn dark.
JB SYSTEMS
®
7/44
OPERATION MANUAL
PM4.2 MEDIAMIX