Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

NS-C5111 CD Car Deck
3 Turn the volume knob on your car deck left or right or press the
VOL
increase the initial volume.
4 Wait three seconds or press the
level.
To adjust the level of a specific function:
1 Press and release the function select button on your car deck or
SEL
you want appears on the display. You can select:
BAS–Bass
TRE–Treble
BAL–Balance
FAD–Fader
2 Turn the volume knob on your car deck or press a
your remote control to adjust the level of the function you selected.

Setting the time

To set the time that is displayed on the LCD:
1 Press the function select button on your car deck or the
on your remote control for more than two seconds.
2 After you enter setup mode, press and release the function select
or
SEL
3 Turn the volume knob clockwise to set the hour, then turn the
volume knob counter-clockwise to set the minute.
Selecting the listening mode
To select the listening mode:
1 Press the function select button on your car deck or the
on your remote control for more than two seconds.
2 After you enter setup mode, press and release the function select
or
SEL
3 Turn the volume knob to select a listening mode. You can select:
Classic
POP
Rock
Flat
4 Wait three seconds or press the
listening mode.
down or up button on your remote control to decrease or
button on your remote control repeatedly until the function
button until
ADJ
button until
DSP
www.insignia-products.com
button to save the volume
ENTER
appears on the display.
appears.
button to save the
ENTER
button on
VOL
button
SEL
button
SEL
15

Publicité

Table des Matières
loading

Table des Matières