Technical Data; Mains Connection; Start-Up And Operation - Nakayama EH4500 Traduction De La Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

or storing the hedge trimmer always fit the
cutting device cover. Proper handling of the
hedge trimmer will reduce possible personal
injury from the cutter blades.
• Keep cable away from cutting area. During
operation the cable may be hidden in shrubs and
can be accidentally cut by the blade
• Before commencing with the trimming check
the hedge for hidden objects such as wire etc.
• When operating the appliance, always hold it
well with both hands and at some distance away
from your body.
Recommendation for the use of a residual current
device with a tripping current of 30 mA or less
2. Layout (see Fig. 1)
1. Cutter rail
2. Hand guard
3. Steady grip with button switch
4. Handle with button switch
5. Stress-relief clip
6. Power cable
7. Cutter guard
Important! You must never use the hedge
trimmer without wearing gloves.
3. Explanation of the plate
Warning
Keep out of the rain and protect from
getting wet.
Read the operating instructions
before using for the first time.
Pull the plug from the power supply
immediately if the cable gets
damaged or severed.
Wear safety goggles
Wear hearing protection
Sound power level guaranteed
99
dB

4. Technical data

Mains connection:

Power input:
Cutting length:
Tooth spacing:
Cuts/min:
L
sound power level:
WA
L
sound pressure level:
PA
Guaranteed sound power level L
Vibration rear handle a
:
h
Front handle a
:
h
Weight:
5. Mains connection
The machine may only be operated with single-
phase alternating current from a 230-240 V AC
50Hz supply. Before you use the machine, make
sure that the mains voltage complies with the
specifications on the rating plate.

6. Start-up and operation

Important! This hedge trimmer is suitable for
cutting hedges, bushes and shrubs. Any use
which is not expressly permitted in manual may
result in damage to the hedge trimmer and place
the user in serious danger.
The hedge trimmer is equipped with a two-
230-240 V~/ 50 Hz
450 W
353 mm
16 mm
1600
97,3 dB(A), K=3 dB
90,2 dB(A), K=3 dB
:
99 dB(A)
wa
2
2
4,45 m/s
, K=1,5 m/s
2
2
4,59 m/s
, K=1.5 m/s
2,27 kg
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

014485

Table des Matières