Maintenance & Cleaning - INVENTOR IW24BL Manuel D'utilisateur

9. MAINTENANCE & CLEANING
• Make sure not to let any water spill on the control elements of the door.
• Be certain that there is no water spilling on the control elements of the door
• While cleaning, you may lightly rinse the interior with water and dry
• Allow the appliance to dry for
approximately 1 to 2 hours.
• Plug into a power source. The
appliance will chill continuously until
set temperature has been reached.
• Be sure to regularly clean the drain
hole to ensure proper drainage.
14
• Do not use abrasive products, abrasive cleaning pads,
solvents or metal objects. Do not use water spray and
steam to clean the appliance.
• Do not use extreme moist cleaning pads. Any moisture
around the electric components, should be avoided.
• The use of a steam cleaner is prohibited, as this may
be very dangerous.
Prior to cleaning the appliance, un-
plug from the wall power socket, and
remove all shelves.
• Clean the appliance with a moist soft
cloth. Use only neutral detergents.
• Clean the unit's interior with a weak
bicarbonate soda solution and rinse
with warm water applying a damp
sponge or cloth.
• Use a damp cloth to clean the
exterior, keep in mind the door must
be shut to avoid getting any polish on
the magnetic door seal or the interior
of the unit.
Clean the
interior of
the appliance
ONCE A
MONTH
EN