Utilitech Pro 00P9016 Mode D'emploi page 5

3. Place the mounting plate into position and secure with
cross screws (BB).
Hardware Used
BB
ST4.2x30 Cross Screw
4. Slide the light onto the mounting plate.
To position head: Twist the connections (C).
5. Using the mounting plate of the solar panel (AA) as
template, mark and drill the holes on the mounting
surface in the desired location with a 3/16 in. drill bit
and insert plastic anchors (CC).
.
Hardware Used
Plastic anchors
CC
x4
x3
5
3
4
5
BB
CC