Important Safety Information; Replacing The Battery - Utilitech Pro 00P9016 Mode D'emploi

IMPORTANT SAFETY INFORMATION

 Never look directly into the light or shine in another person's eyes.
 Do not expose the light to fire or intense heat.
 DO NOT DISPOSE OF BATTERY IN FIRE.
 Non-rechargeable battery is not to be recharged.
 Do not immerse in water.

Do not dispose the rechargeable battery in the regular waste system, waterway, stream or
any other body of water. Preserve the environment by disposing battery in accordance with
local, state, and federal regulations.

REPLACING THE BATTERY

The battery installation place is inside the mounting plate of
the light. Remove old battery and place new Li-ion
TNL-ITR18650 rechargeable battery.
For optimum performance, allow battery to charge in
full sunlight.
ASSEMBLY INSTRUCTIONS
1. Remove the mounting plate of the light
downward motion.
2. Using the mounting plate of the light as a template, mark
and drill the holes on the mounting surface in the desired
location with a 3/16 in. drill bit and insert plastic anchors
(CC).
.
Hardware Used
CC
Plastic anchors
BATTERY MAY EXPLODE OR LEAK.
by sliding in
x4
4
BATTERY
a
1
2
CC