Table des Matières
Publicité
Timers ( continued)
Lifebreath Wireless Repeater
99-RX02
The Wireless Repeater is used to extend range of the 99-
DET02 Wireless Timers. The Repeater plugs directly into
a 120V power outlet. The 99-RX02 wirelessly connects to
the main control as well as the 99-DET02 Timers.
The 99-RX02 Repeater should be installed at the halfway
point between the 99-DET02 Wireless Timer and the
main wall control if timer is out of range.
Indicator LED's
When the Repeater is positioned correctly, a solid green
LED will illuminate indicating the Repeater has a strong
connection to the main wall control and may be moved
farther away if necessary.
A flashing green LED means that the Repeater has a moderate connection to the main wall
control. The Repeater will function properly at this position but should not be moved farther from
the main wall control to ensure the connection is maintained.
A red LED indicates the Repeater is not connected to the main wall control and should be
repositioned closer to the main wall control to re-establish the connection and function.
Dehumidistat
Lifebreath Dehumidistat 99-DH01
Initiates high speed ventilation when the moisture
level in the home exceeds the set point on the
control. Once the humidity in the house is
reduced, the HRV will revert back to its previous
setting.
The Dehumidistat should be set to OFF for all
seasons except the heating season. Refer to "How
the Dehumidistat Works" in this manual before
setting the Dehumidistat.
Power Plug
Dehumidistat LEDs
Set to the desired
humidity level. High
speed ventilation will
initiate when the indoor
moisture level exceeds
the set
Dehumidistat Adjust
Button
11
Publicité
Table des Matières
