Using Jongo Setup Manager - PURE Jongo S3 Mode D'emploi

Using Jongo Setup Manager

Introduction
The Jongo Setup Manager allows you to change various Jongo settings, such as changing the name of
the Jongo speaker, and view the software version. To access Jongo Setup Manager, put Jongo in Wi-Fi
Setup mode by pressing the WiFi button on the rear of Jongo and connect to the Jongo S3 ****** wireless
network. Enter http://192.168.1.1 into your web browser.
Wireless network setup
The Wireless network setup page is divided into two main sections, Jongo Name and Wireless Network
Settings.
Wireless Network
Settings
Changing Jongo's name
If you prefer, you can change the name that the
Pure Connect app, Pure Stream and Bluetooth
uses to identify Jongo.
1. Type the name (e.g. 'Jongo Bedroom 1') that
Jongo
you want to assign Jongo in the Your Jongo's
Name
Name box and click Change name. After
Jongo's name has changed, the Change name
button will grey out.
2. Push the WiFi button on the rear of Jongo to
put Jongo back into Wi-Fi Connected mode (see
page 5 for more information).
Wireless setup
See page 8 for more information on wireless
setup.
Clear all network settings
To clear all network settings, click the Clear all
network settings button.
Note: You will need to reconnect to Jongo in Wi-Fi
Setup mode to re-configure the network settings.
Changing Jongo Setup Manager
language
Use the Web page language drop-down menu
to select the language (UK English, US English,
French, Italian, German, Spanish, Danish, Dutch,
Swedish, Norwegian, Russian, Portuguese, Arabic
or Turkish) that you want to use for Jongo Setup
Manager. When you have finished setting the
language, push the WiFi button on the rear of
Jongo to put Jongo back into Wi-Fi Connected
mode (see page 5 for more information).
EN
11