Unpacking The Device; Power Sources; Battery Installation - LEXIBOOK RCDK100 Serie Mode D'emploi

Masquer les pouces Voir aussi pour RCDK100 Serie:

Mode d'emploi (39 pages)

Table Des Matières

Table des Matières

Les langues disponibles

21. The apparatus shall not be exposed to dripping or splashing and no object filled with

liquids, such as vases, shall be placed on the apparatus.

22. Minimum distance 10 cm around the apparatus for sufficient ventilation.

23. No naked flame sources such as lighted candles should be placed on the apparatus.

24. Attention should be drawn to the environmental aspects of battery disposal.

25. Use the apparatus in moderate climates.

26. Keep a minimum distance around the device for sufficient ventilation.

27. The openings should never be blocked by newspapers, curtains, tablecloths, etc.

When unpacking, ensure that the following elements are included:

1 x CD Player with 2 integrated microphones

1 x Instruction manual

WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not

part of this product and should be discarded.

Your CD Player operates with the AC/DC adapter 6V

included).

AC operation

1. Check that the unit is switched off.

2. Connect the adapter plug (not supplied) to the socket on the side of the unit.

3. Connect the adapter into a main socket.

Warning: Disconnect the adapter if the game is not used for a long period of time to prevent

overheating. When the game is powered by an adapter, do not play outside. Check the state

of the adapter and the connection cords regu larly. If their condition is deteriorating, do not

use the adapter until it has been repaired. The toy shall only be used with a transformer for

toys. The adapter is not a toy. The console should be disconnected from the power supply to

be cleaned if liquids are used for cleaning. The toy is not intended for children under 3 years

old. Misuse of transformer can cause electrical shock.

Parental advisory: transformer and adaptor for toys are not intended to be used as a toy.

The usage must be under parental advice.

Battery installation

1. Using a screwdriver, open the battery compartment cover located at

the back of the unit.

2. Insert 4 x 1.5V

the polarity indicated in the compartment, and as per the diagram shown

opposite.

3. Close the battery compartment and tighten the screw.

Note: The AC adapter must be disconnected from the AC socket on the

side of the unit in order for the product to operate on battery power.

RCDK100seriesIM1406_V15_217YL.indd 12