LEXIBOOK Meteoclock Suntime Mode D'emploi page 22

Step 1 – Setting the radio-controlled zone of the clock
• Set the MSF/OFF/DSF switch,
France, Spain, Italy and Germany.
• Set the switch on MSF for use in the United-Kingdom, Ireland and Portugal.
• Set the switch on OFF for use outside the GMT 0 and GMT 1 zones. If you do not live in Europe
(or if you live outside of the France and England time zones), the SM1660 will not be able to
receive the time automatically. You will thus need to set the time manually (See page 29).
Step 2 – Inserting the batteries
• Insert 3 AA/LR6 batteries into the battery compartment found at the back of the main unit.
Close the lid of the compartment.
• Unscrew the lid of the battery compartment found at the back of the wireless sensor.
Insert  AAA/LR0 batteries. Replace the lid of the compartment using a screwdriver.
• If you have not purchased additional sensors you will not need to set the remote sensor. Do not
press the and
refer to the paragraph entitled "Multiple sensor use".
Step 3 – Setting up the main unit and the remote sensor
• Place the remote sensor outside. It can also be wall-mounted.
• Pull out the main unit's table stand, and place it on a smooth surface. It can also be
wall-mounted.

SETTINGS
found at the back of the main unit, on DSF for use in
keys. If you wish to set more than one sensor onto your main unit, please