Step 2: Configuring The Navus 2; Step 3: Acquiring Satellites - Mopar Navus 2 Mode D'emploi

Step 2: Configuring the Navus 2

To turn on your Navus 2, press and hold the
Follow the on-screen instructions to configure your Navus 2.

Step 3: Acquiring Satellites

Make sure your vehicle is outdoors in an open area, away from tall buildings and trees
(not in a garage). Turn on the Navus 2. Acquiring satellite signals may take a few
minutes.
The bars in the upper-left corner indicate satellite strength. When the bars are
green, your Navus 2 has acquired satellite signals; you can find your destination and
go to it.
Step 4: Using the Navus 2
Touch to find a destination.
A
Touch to view the map.
B
Touch to adjust the Navus 2's settings.
C
Touch to adjust the brightness of the screen.
D
Navus 2 Owner's Manual
Power button on the side of the unit.
A
B
G S
ettInG tarted
D
C

E
N