Seasons Sentry UMB-955258 Manuel D'assemblage page 5

Assembly Instructions (cont.)
N1
Step 4: Insert plug into socket under solar panel as shown above.
Step 5. Put solar panel on top of umbrella and hide the plug and wire inside the
cavity at top. Then turn the solar panel clockwise. Do not over tighten.
G
Step 6:
Remove battery (G) from accessories kit and place into the housing locat-
ed on the arm of the glide handle. Then put the solar umbrella in direct sunlight
outdoors to charge the solar panel for 8 hours before the first use.
MAKE SURE THE LED LIGHTS ARE OFF ON UMBRELLA TO ALLOW SOLAR PANEL
TO FULLY CHARGE BATTERY.
E
5