Lens Installation; Installing Fixed Iris Lenses; Installing Manual Iris Lenses; Installing Auto Iris Lenses - Honeywell E Série Guide D'installation

Lens Installation

Installing Fixed Iris Lenses

To install a fixed iris lens:
1. Turn the back focus adjustment ring fully clockwise (when viewed from
the front). See "Back Focus Adjustment" on page 6.
2. Fit the lens to the camera and rotate clockwise until the lens is fully
screwed into the camera.
3. If the lens has a focusing ring fitted, set it to infinity (
back focus. See "Back Focus Adjustment" on page 6.
4. Ensure the shutter control is set to Auto Electronic Shutter (AES).

Installing Manual Iris Lenses

To install a manual iris lens:
1. Turn the back focus adjustment ring fully clockwise (when viewed from
the front).
2. Fit the lens to the camera and rotate clockwise until the lens is fully
screwed into the camera.
3. Ensure the shutter control is set to Auto Electronic Shutter (AES).
4. Adjust the back focus using the back focus ring on the front of the
camera. See "Back Focus Adjustment" on page 6.

Installing Auto Iris Lenses

Installing Direct (or D.C.) Drive Lenses

To install a Direct or D.C. Drive Lens:
1. Turn the back focus adjustment ring fully clockwise (when viewed from
the front.)
2. Fit the lens to the camera and rotate clockwise until the lens is fully
screwed into the camera.
Rev 1.01
∞
) then adjust the
7 Document 900.0350
05/05