Kobalt 2600703A Mode D'emploi page 12

ASSEMBLY INSTRUCTIONS
WARNING
Always remove battery from your tool when you are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery will prevent accidental starting that could cause serious
personal injury.
5a. TO INSTALL BATTERY PACK
• Open the battery compartment cover (G).
• Align the battery (T) with the cavity in the snow
thrower housing.
• Insert the battery into the right battery
compartment to start the snow thrower. This
snow thrower is equipped with a battery
storage compartment which offers a convenient
place for storing your battery when not in use,
or to store an extra battery pack to extend your
run-time.
• Slide the battery down to lock it into position.
The battery is fully inserted into the snow
thrower when you hear an audible "click".
• Close the battery compartment cover.
5b. TO REMOVE BATTERY PACK
• Release your grip on the bail lever to stop the
snow thrower.
• Press the battery release button in the snow
thrower housing. This will cause the battery to
raise out of the tool slightly.
• Remove battery pack from the snow thrower.
5
N
M
12
T
G
Battery
release
button