Reflecta Combo Album-Scanner Mode D'emploi page 39

Micro USB connector of the scanner. The red
LED will turn on during battery charging when the
scanner is not in use, and will be off when it is
fully charged.
Please charge the battery for at least 3 hours
Note:
The scanner can also be operated without the battery
when the power adaptor and USB cable is connected to
the scanner.
Status LED indication:
Red LED: (1) On when the power of the scanner is on.
(2) When the scanner is not in use and the
power is off, it will be on during battery
charging and off when battery is fully
charged.
Green LED: Lights up when photo scanning is set.
Blue LED: Lights up when film scanning is set.