Getting Started; Installing The Battery/Checking Battery Power - Nikon Nuvis 200 Manuel D'utilisation

Getting started

1
Install the battery.
Open the battery chamber lid
▼
using a coin or the like.
▼ Install one 3V lithium battery
CR2 inside the battery chamber.
Close the battery chamber lid.
▼
•Reset the date and time, when the
battery is replaced and the current
data returns to the initial setting.
(- P. 26)
Installing the battery/
Checking battery power
2
Turn the camera on.
•The lens cover automatically opens and
the lens moves out to the W (wide-
angle) position.
3
Check battery power.
•If " " blinks or nothing appears on
b
the LCD panel, the battery is exhausted
and needs to be replaced.
•If a low battery power indicator "
does not appear, battery power is full.
E
"
b
9