Removing The Film - Nikon Nuvis 200 Manuel D'utilisation

Removing the film

E
1
The film starts rewinding
automatically.
•At the end of the film roll, the film
rewinds automatically.
•While the film is rewinding, the frame
counter counts down one by one.
•If you want to remove the film while the
number of available frames still appears
on the LCD panel, rewind the film
midway through the roll. (- P. 19)
18
2
Make sure the blinking letter "´"
is visible on the LCD panel.
•When the film is completely rewound, the
letter "´" blinks and the cartridge chamber
cover lock mechanism is released.
•If film rewind stops midway through the
roll due to a dead battery, it resumes
automatically as soon as the battery is
replaced.
•The cartridge chamber cover does not
open if the battery is exhausted.
3
Open the cartridge chamber
cover and remove the film.
Do not open the cartridge chamber
cover until the letter "´" starts
blinking.
•Releasing the shutter or setting the date
and time cannot be performed unless
the rewound film is removed.
•When opening the cartridge chamber
cover, make sure that the camera bottom
faces up, or the cartridge may fall out.