Martin Logan MIKROS 70 Mode D'emploi page 9

break-in period should result in improved performance. For rapid break-in you may
choose to leave the earphones connected to an audio source playing music during
the night or when otherwise not in use.
CLEANING
To clean the earphones lightly wipe the ear
piece and cord with a slightly damp cloth. If
the ear tips become clogged, remove the
ear tips and gently squeeze the clog out of
the ear tip shaft or extract using a pin. Never
attempt to remove clogs while the ear tips are
installed on the earphone. Never get the
earphones wet. Never use solvents and other
harsh cleaning products as they will perma-
nently damage the earphones.