Starting The Engine - Senci AP170F Manuel D'utilisation

4-3. Engine Oil Inspection
·Is the engine filled with the recommended engine oil, and is the oil dirty?
add or change the engine oil.
4-4. Inspect the Tightness of all Fasteners or Screws
·Are all the screws tight?
·Be sure to check the screw used to fasten the muffler.
(Do this when the muffler is cold)
4-5. Fuel and Oil Leaks Inspection
.Are there any fuel or oil leaks? If any are found repair them.

5. STARTING THE ENGINE

5-1. Starting the Engine
WARNING:
Before starting the engine, carefully read and understand the "SAFETY TIPS" and
"PRE-OPERATION
INSPECTION" section of this OPERATION MANUAL.
Start the engine as follow
a. Recoil start:
• Hold the starter handle and pull it slightly
Until the compression position is reached,
And then pull it swiftly from this position;
• Slowly return the starter handle to its original
position after the engine starts.
After the engine starts, gradually turn the choke lever to the full "OPEN"
position, and set the throttle lever in the Max. position. Before loading,
warm up the engine for about 3minutes.
If there is not enough oil, if it is dirty, or it has been used longer than the specified time,