Important Safety Information - Cafe C7CDAAS3PD41 Manuel D'utilisation

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING
your coffee maker, always follow these basic safety precautions.
■ READ ALL INSTRUCTIONS BEFORE USING
■ Use only a 120 V, 60 Hz standard electrical supply that is properly grounded
in accordance with the National Electric Code and local codes and
ordinances.
■ Do not touch hot surfaces. Use handles and knobs.
■ To protect against electric shock, do not place cord, plug, or base unit in
water or other liquids.
■ Product is for household use only. Do not use outdoors.
■ To avoid a possible burn hazard, make sure the carafe is clean, empty and
the lid is locked prior to brewing.
■ Do not let cord hang over edge of table or counter, or touch a hot surface.
■ Scalding may occur if the lid is removed during the brewing cycle .
■ Unplug appliance before cleaning and when not in use.
■ Do not operate if any component, including the cord or plug, is damaged.
■ Appliances should not be used by or near children.
■ To reduce the risk of fire or electric shock, do not attempt to disassemble,
repair, modify, or replace any part of your product.
■ Use this product only for its intended purpose as described in this user
manual.
■ Use of any accessories not recommended by the manufacturer can cause
injuries.
■ Keep ventilation openings in the appliance enclosures or in the built-in
structure, clear of obstruction.
■ Do not place on or near a hot gas or electric burner, or in a heated oven.
■ To disconnect, make sure no coffee brewing, then remove the plug from wall
outlet.
■ This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to
modify the plug in any way.
■ Do not use an extension cord.
READ AND SAVE THESE INSTRUCTIONS
T
o reduce the risk of fire, explosion, electric shock, or injury when using
4