Koenic KHB 700 Mode D'emploi page 16

IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FU-
TURE REFERENCE.
• Before connecting the appliance to a socket
outlet, make sure the voltage indicated on
the appliance corresponds to your local mains
voltage.
• For safety reasons, this class II appliance is
provided with double or reinforced insulation as
indicated by the symbol
• This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been
given supervision or instruction concerning
use of the appliance by a person responsible
for their safety. Children should be supervised
to ensure that they do not play with the appli-
ance.
• If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or similarly qualified persons in order to
avoid hazard.
• Caution: Risk of injury. The cutting blades are
very sharp. Use care when handling the blades,
emptying the bowl, during cleaning and stor-
age.
• Always disconnect the blender from the supply
when unattended and before assembling,
disassembling or cleaning.
• Do not allow children to use the blender with-
out supervision.
• Switch off the appliance and disconnect from
the supply before changing accessories or ap-
proaching parts that move in use.
• If the blades get stuck, unplug the appliance
before removing the ingredients that block the
blades.
• Only use with the stand provided.
• CAUTION: Ensure that the blender is switched
off before removing it from the stand.
• Do not immerse the motor unit in water
or any other liquid, nor rinse it under
the tap. Only use a moist cloth for cleaning the
motor unit.
16
• The appliance is intended for household use
• Do not exceed the quantities and processing
. • Do not use attachments other than recom-
• When using attachments, make sure they are
• Do not operate this blender longer than
• Never carry or pull the appliance by the supply
• Never put the appliance or supply cord on hot
only. Do not use the appliance for purposes
other than described in this manual in order to
avoid hazardous situation.
times indicated in this manual.
mended by the manufacturer or specified in
this manual.
connected properly and securely.
indicated in the user manual when blending
or chopping heavy loads. After this amount of
time, let the appliance cool down sufficiently
before next operation. None of the recipes in
this user manual constitute heavy loads.
cord. Do not pull the supply cord over sharp
edges. Do not jam or bend it.
surfaces or near open flames.