Technical Data; Application And Function - RODCRAFT RC7702V6 Manuel

Dear customer!
Rodcraft Pneumatic Tools thanks you for the purchase of one of our products and invites you to reading this user manual.
All necessary information for an adequate use of the purchased equipment is contained herein: it is advisable to read everything from cover to cover and to
observe the references.
Please keep the user manual in good order. The contents of this manual may change without prior notice and without further obligations, so that changes
and improvements can be inserted into already distributed copies.
It is our aim to manufacture products, with which you can work as safe and efficient as possible. Most important for your safety are your caution and
judgment in handling this product and other tools. These safety precautions contain some of the important sources of danger; however, they cannot cover all
possible risks.
Without prior written permission of the manufacturer copying or translation of any part of this manual is prohibited.

1. Technical Data

Pad
Diameter - Orbit
Model
Thread
[mm] [mm]
7702V6
150 - 5/16''
V
7705V6
150 - 5/16''
V
7710V6 150 - 5/16''
V
max pressure 6.3 bar (90 psi)
weight of pad approx. 125g
a :Vibration level, k Uncertainty ; L
hd
Declaration of noise (ISO 15744) and vibration emission (ISO 28927-3)
All values are current as of the date of this publication. For the latest information please visit rodcraft.com.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared
values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way
the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user.
We, RODCRAFT PNEUMATIC TOOLS , cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual expo-
sure, in an individual risk assessment in a work place situation over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing hand-arm vibration can be found at http://
www.humanvibration.com/EU/VIBGUIDE.htm
We recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures
can be modified to help prevent future impairment.

2. Application and Function

• A random orbital sander is a tool used for smoothing and removing material from surfaces by means of sandpaper in order to achieve a desired finish.
• A random orbital sander should only be used to smooth surfaces with sandpaper and must never be used in any other way.
• Do not misuse the random orbital sander.
• Please read the product safety information carefully!
3. Inspection – Scope of Delivery
Open the packing and check the equipment for transport damage and that all parts specified in the shipping documents are at hand. Before using the equip-
ment conduct a visual inspection in order to determine leakages, damages, loose or missing parts.
Scope of delivery:
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
Speed Weight
[min-1] [kg]
2.5 10000 0.825
5 10000 0.850
10 10000 0.945
Sound pressure level dB(A), K
pA
RC7702V6 / RC7705V6 / RC7710V6
Random orbital sander
Wrench
Dehumidifier packet
User manual
Safety instructions
EC Declaration of Conformity
Spare part list
6" Velcro backing plate 5/16-24UN
RODCRAFT PNEUMATIC TOOLS
EN
Inner Hose Dimension
Dia. axb
[mm] [mm]
8
107x315
8
107x315
8
107x315
= K = 3 dB Uncertainty.
pA WA
Air Consumtion
Average – con- Air Inlet
tinuous
[l/min] [inch]
450 550 1/4" FT
450 550 1/4" FT
450 550 1/4" FT
Sound-
Vibrations
pressure
dB(A) a k [ ]
[ ] m/s²
m/s²
hd
79.5 3.8 1.5
86.1 5.4 1.2
79.1 9.0 2.3
6