Installation Steps; Package Contents - Axis P7214 Guide D'installation

AXIS P7214/P7210 Installation Guide
AXIS P7214/P7210 Video Encoder
This installation guide provides instructions for installing a AXIS P7214/P7210 video encoder on
your network. For all other aspects of using the product, please see the product's User's Manual,
available on the CD included in this package, or from www.axis.com

Installation steps

Follow these steps to install the AXIS P7214/P7210 on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware. See page 7.
4. Assign an IP address. See page 9.
5. Set the password. See page 12.

Package contents

Item
Axis video encoder models
Power adapter models
Mounting kit
CD
Printed Materials
Installation Guide
Models/variants/notes
AXIS P7214
AXIS P7210
AXIS P7214: Type PS-K
AXIS P7210: Type PS-P
AXIS P7214
• 4 screws and 4 plugs to mount the encoder to a concrete wall
AXIS P7210
• 8 screws (for mounting with brackets)
• 4 M6x20 screws for mounting in rack
• 2 mounting brackets
AXIS P7214/P7210
• 4 Surface protection pads
• Terminal block connectors (I/O: 6-pin connector, RS-485/RS-
422: 2 x 2-pin connector for AXIS P7214; 8 x 2 pin connector for
AXIS P7210, Power: 2-pin connector)
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS P7214/P7210 Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws and
regulations.
Page 5