ClearSounds ANS3000 Mode D'emploi page 11

OGM1 is "Hello, your call cannot be taken at the moment.
To record your message, please speak after the tone." The
default OGM2 is "Hello, your call cannot be taken at the
moment. Please call back later."
To Record the OGM:
1. Press and hold the OGM1 or OGM2 key until you hear
the announcement.
2. Record your message after the beep. Recording will stop
automatically after 3 minutes or you can confirm and end
the recording by pressing the Play/Stop key at any time.
3. The message will be played back immediately. If you do
not like your message, you can record it again or restore the
default message.
Note: OGM2 will be played if your answering machine
becomes full.
To Play the OGM:
Press the OGM1 or OGM2 key to playback the current message.
Use the Play/Stop key to stop playback at any time.
To Restore the OGM:
Press the OGM1 or OGM2 key to playback the current message,
then press and hold the Delete key to restore the default
message. You will hear a confirmation tone. The default OGM1
or OGM2 will be played back.
To Select which OGM will play:
Press the OGM key (OGM1 or OGM2) that you want to use.
After the OGM message plays back, it automatically becomes
the active OGM. If you want to switch to the other OGM, simply
press the other OGM key.
11 – ENGLISH