Programming The Timer (Alternative To 5.3); Adjusting The Control Mode - Hobby Biotherm pro Mode D'emploi

5.4 Programming the timer (alternative to 5.3)

5.4.1 Adjusting the control mode

If you want to program the timer control, press
flashing.
If you want to operate slot 2 (
Continue making your settings with item 5.4.2 of these instructions.
) is to be operated via interval control, use the ▲ button to select "Int"(Interval) and confirm by pressing
If slot 2 (
the button. Continue making your settings with item 5.4.3 of these instructions.
) is to remain permanently activated, use the ▲ to select "ON" and confirm by pressing the
If slot 2 (
button. If you want to finish programming, press and hold
mode.
while "TIME" is flashing, then "
) with programmed turn-on and turn-off times, press
for 3 seconds until the display returns to operating
" (automatic) starts
when " " flashes.
11