Bushnell TOUR V4 Mode D'emploi page 8

PinSeeker (LCD Indicator - ) Ever have trouble getting distance to the flag? This advanced mode allows
easy acquisition of the flag without inadvertently getting distances to background targets (i.e. trees) that
have stronger signal strength.
Press the POWER/FIRE button to turn the unit on. Next, align the aiming circle reticle onto the flag that
you want distance to. Then, press and hold the POWER/FIRE button and move the laser slowly over
the flag or desired object until a circle surrounds the flag indicator. If the laser beam recognized more
than one object (i.e. flag and background trees), distance of the flag will
be displayed and a circle will surround the PinSeeker indicator informing
the user that distance to the flag (i.e. closer object) is being displayed in the
LCD (as seen below). There may be times when only the laser beam only
sees one object in its path. In this case, the distance will be displayed, but
because more than one object was not acquired, a circle will not surround
the flag indicator.
TIP: While pressing the POWER/FIRE button, you can move the device slowly
from object to object and intentionally force the laser to hit multiple objects
to ensure that you are only displaying the closest of the objects recognized
by the laser.
Once the device has shut off, the unit will always default back to the last
mode used.
About JOLT
The new JOLT feature provides a vibration signal (similar to setting a cell
phone to "vibrate") that will be felt when the Pinseeker technology indicates
the flag has been detected and the distance to it is displayed in the LCD.
8