Product Specifications - Suaoki S670 Guide De L'utilisateur

Product Specifications

Specifications S670 (100Vac-120Vac Output)
Battery Material Lithium-ion Rechargeable Cell
Battery Voltage 14.4V
Battery Capacity 720Wh(14.4V/50000mAh, equivalent 3.6V/200000mAh)
Continuous Output Power 500W
Peak Output Power 1000W
Continuous Output Voltage 100Vac-120Vac
Continuous Frequency 60/50Hz
505W ≤ PLoad < 600W @2Min;
Overload 600W ≤ PLoad < 650W @10s;
650W ≤ PLoad < 1000W@500ms;
13V (Car Charger Socket)
Output Voltage 13.0±0.3V
Continuous Output Current 10A
Output Voltage 12V
Continuous Output Power 10A
USB1&USB2 5V/3A,9V/2A,12V/1.5A QC3.0 (18W)
USB3&USB4 5V/3A
5V/3A,9V/3A,12V/3A,15V/3A,20V/2.25A
USB Type-C
(45W PD)
Max Input Power 168W
12-45Vdc (Over-Voltage Protection
Input Voltage Range
47V±1V)
Solar Charging Mode MPPT
Relative temperature 0-40°C
Relative humidity 10%-90%
Trouble-shooting
If your device can not be charged with this portable power supply, follow these steps:
1. Make sure the main power button is turned on.
2. Ensure the output port has been turned on. The green LED light indicating its state should be lit up.
3. Check the battery capacity display. If it's at 20% or below, you need to charge the portable power supply.
4. Verify your device is suitable to be charged with this product. All the output ports have their own Max
power capacity. Check them to ensure your device is compatible.
S670 (220Vac-240Vac Output)
Battery
AC Output
500W
1000W
220Vac-240Vac
50Hz
505W ≤ PLoad < 600W @2Min;
600W ≤ PLoad < 650W @10s;
650W ≤ PLoad < 1000W@500ms;
13.0±0.3V
10A
12V (DC Output)
12V
10A
USB Output
5V/3A,9V/2A,12V/1.5A QC3.0 (18W)
5V/3A
5V/3A,9V/3A,12V/3A,15V/3A,20V/2.25A(45W PD)
INPUT
168W
12-45Vdc (Over-Voltage Protection 47V±1V)
MPPT
Main Unit
EN-07
Error
Error Details
Code
Heatsink A over-temperature Heatsink temperature ≥ 75°C
E01
protection (±2°C)
Heatsink A low-temperature Heatsink temperature ≤ -18°C
E02
protection (±2°C )
Voltage ≤ 8V (±0.2V) or battery
E03 Battery malfunction protection
damage
Battery discharging over- Battery pack temperature ≥ 63°C
E04
temperature protection (±2°C)
Battery discharging low- Battery pack temperature ≤ -18°C
E05
temperature protection (± 2°C )
Battery charging over-temperature Battery pack temperature ≥ 48 °C
E06
protection (±2°C)
Battery charging low-temperature Battery pack temperature ≤ 2°C
E07
protection (±2°C)
Total voltage overvoltage
E08 Battery voltage ≥ 17.2V (±0.2V)
protection
Total voltage low-voltage
E09 Battery voltage ≤ 12.8V (±0.2V)
protection
E18 PV input overvoltage protection PV voltage ≥ 47V (±1V)
E20 PV input overcurrent protection PV current ≥ 10A (±1A)
E24 PD/QC short-circuit protection PD or QC output short circuit
DC12V with load power exceeds
E26 DC12V output overload protection
130W
DC13V with load power exceeds
E29 DC13V output overload protection
145W
System with load power exceeds
E34 System overload protection
560W and turn off DC
E36 Inverter output overload protection Inverter output overload
Inverter output overcurrent
E37 Inverter overload or short circuit
protection
System with load power exceeds
E38 System overload protection
560W and turn off AC
Heatsink B over-temperature Heatsink temperature ≥ 75°C
E39
protection (±2°C)
Heatsink B low-temperature Heatsink temperature ≤ -18°C
E40
protection (±2°C )
Note:
1. The setting numbers above are theoretical numbers. There will a slight deviation between the actual
numbers and the theoretical numbers. This is a normal phenomenon.
2. When the battery is low-voltage, the power indicator icon on the LCD screen flashes. At this time, the
product needs to be charged. When the battery voltage is higher than 13.4V, the power indicator icon
stops flashing.
Protection Condition Resume Condition
Heatsink temperature ≤ 70°C
(±2°C ), auto-resume
Heatsink temperature ≥ -8°C
(±2°C), auto-resume
Cannot charge
Battery pack temperature ≤ 55°C
(±2°C ), auto-resume
Battery pack temperature ≥ -8°C
(±2°C ), auto-resume
Battery pack temperature ≤ 38°C
(±2°C ), auto-resume
Battery pack temperature ≥ 12°C
(±2°C ), auto-resume
Discharge, voltage ≤ 16.6V(±0.2V),
auto-resume
Charge, voltage ≥ 14V(±0.2V),
auto-resume
PV voltage ≤ 40V(±1V), auto-
resume
Remove PV charging to resume
Remove the load and restart the
USB output
Remove the load and restart the
DC output
Remove the load and restart the
DC output
Remove the load and restart the
DC output
Remove the load and restart the AC
output
Remove the load and restart the AC
output
Remove the load and restart the AC
output
Heatsink temperature ≤ 70°C
(±2°C ), auto-resume
Heatsink temperature ≥ -8°C
(±2°C), auto-resume
EN-08