Installation
What's in the Box
Make sure all the following items are
included in the packaging. If any item
is damaged or missing, contact your
dealer.
RV Range Hood:
● 12V RV Range Hood
● Mounting Screws (4 pieces)
● Instruction Manual
● Warranty Card
Exterior Wall Vent (Sold Separately)
● Exterior Wall Vent
● Mounting Screws (6 pieces)
● Instruction Manual
● Warranty Card
Range Hood Installation
1. Take out the range hood from box
and put on a flat surface with the grill
cover facing up.
2. Press the two release tabs on the
grill cover to release it from range
hood. (Fig. 1)
Fig. 1
3. Mark centerline of range hood on the
wall. (Fig. 2)
NOTE: The minimum vertical distance
to combustible material above the
range cooking top is 191/2 inches
when installed with a range hood,
5
provided the overhead construction
does not extend 13 inches from the
rear wall. (Fig. 3)
4³⁄4"
10⁷⁄8"
23⁹⁄16"
Fig. 2
Fig. 3
4. Mark and cutout a through-hole on
the wall according to the dimensions
outlined in Fig. 2.
5. Connect the range hood wires to a
12V power source from the bottom of
the cabinet. Connect white to white,
black to black. (Fig. 4)
NOTE: Make all electrical supply
connections in accordance with local
and/or applicable codes.
3³⁄4"
⁵⁄8"
Range Hood
Outline
19¹⁄2"
Center of
Range Hood