Technical Specifications - ECG ZH 1321 Mode D'emploi

BEARD TRIMMER
TROUBLESHOOTING
Malfunction:
The device does not work
The heads of the trimmer
do not work smoothly

TECHNICAL SPECIFICATIONS

Trimmer:
Battery
Permissible ambient temperature
Noise level
Adapter (not included)
We reserve the right to make technical and visual changes to the device or its
accessories for the continuous improvement of the product.
DISPOSAL
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing
foil, PE bags, plastic elements – throw into plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of old electrical & electronic equipment (applicable in the EU
Member States and other European countries with separate collection
systems)
The represented symbol on the product or package means the
product shall not be treated as domestic waste. Hand over the
product to the specified location for recycling electric and electronic
equipment. Prevent negative impacts on human health and
the environment by properly recycling your product. Recycling
contributes to preserving natural resources. For more information on the
recycling of this product, refer to your local authority, domestic waste
processing organization or store, where you purchased the product.
Dispose of the lubricant container only after it's emptied.
The Ni-Mh battery used in this device must not be disposed of with
mixed household waste. The battery must be properly disposed
off. For more information, contact battery distributors or waste
collection points.
This product complies with EU directives on electromagnetic
compatibility and electrical safety.
The operating instructions are available at the website
www.ecg-electro.eu.
Changes of text and technical parameters reserved.
Check the following:
Is the battery empty?
Are the heads clean and lubricated?
1,2 V NiMh battery, 600 mAh
from 5 °C to +35°C
< 60 dB
Recommended values: output 5
V DC- 1A
English
08/05
Ni-Mh
11