Tiiwee Plus 12 LED Manuel D'utilisation page 4

Important note: Disconnecting the device from the 220V power supply will reset the program,
after which reprogramming the device using the instructions above is required. Therefore
combining the TV Simulator Plus with an external power timer is not possible.
At dusk, the device switches itself on and simulates a colour television flickering light for the
selected amount of hours.
When exposed to light (>ca. 30lux), the TV Simulator also switches off before the selected time
has elapsed.
Power off
Press the selection button (5) until the digital display shows "0".
Technical data
TV Simulator
Input Voltage 9V
Power consumption 300 mA
Polarity
Power supply (Model BYA-DY1304-9-300)
Mains voltage100 – 240 V~/ 50 – 60 Hz
Output voltage / current 9V / 300 mA
Polarity
Disposal
APPLIANCES
Do not throw your device in the normal household waste at the end of its useful life.
Check with your local authority for recycling advice.