Product Identification; Product Specifications - RedHotDot POWERDUCTION 50 LG Mode D'emploi

This equipment complies with the IEC 61000-3-11.
Maintenance:
If the power cable is damaged, it must be replaced by the manu- facturer, its after
sales service or an equally qualified person to prevent danger.
- Warning! Always disconnect from the mains before performing maintenance on
the device.
High Voltage and Currents inside the machine.
- If the internal fuse is melted, it must be replaced by the manufac- turer (GYS'
dedicated sales service) or by an equally qualified person to prevent any accidents.
- Remove the casing on a regular basis, to remove any excess dust. Take this
opportunity to have the electrical connections checked by a qualified person, with an
insulated tool.
- Do not use solvents or any agressive cleaning products.
- Clean the device's surfaces with a dry cloth.
Regulations:
Device complies with europeans directives.
The certificate of compliance is available on our website.
EAEC Conformity marking (Eurasian Economic Community).
Waste management:
This product should be disposed of at an appropriate recycling facility. Do not throw
away in a domestic bin.
Ecopackaging symbol
«The product's manufacturer contributes to the recycling of its pac- kaging by
contributing to a global recycling system».
TRIMAN symbol
«This product should be recycled appropriately».

PRODUCT IDENTIFICATION

At the back of the product, there is an identification plate on which the CE marking is affixed:
- Name and address of the manufacturer
- Date of manufacture
- Model
- Product Type
- Operating Voltage
This data must be specified for each maintenance intervention, or if spare parts are requested.

PRODUCT SPECIFICATIONS

Induction heater Power: 5.2 kW
Operating voltage: 185 V - 265 V
Power supply frequency: 50 Hz - 60 Hz
Heater Frequency: 30-50 kHz, microprocessor controlled.
POWERDUCTION 50 LG
21
EN