Safety Guidelines; About Your Black+ Decker Electric Tankless Water Heater - Black & Decker BD-24-DWH Mode D'emploi

1. Safety Guidelines

Please read this manual thoroughly before installing & using the instant water heater. Failure
to comply with the safety, installation or operating instructions will void the product warranty.
Manufacturer and distributor of the product will not be liable for any damage or injury caused
by the failure to comply with the installation and operating instructions specified in this manual
or the improper use of the product. Ensure that this product is installed in accordance with the
national, state or local electrical and plumbing codes applicable to your area, and as specified in
our instructional guide to get the best performance from your Instant Water Heater.
This product has more than one power connection source. Do not attempt to install, clean, inspect,
disassemble, service or repair the water heater without shutting off all the power sources to the
unit on the main electrical panel using the circuit breaker.
WARNING: Failure to adhere might result in severe injury or death. The water heater must
be installed in compliance with all national, state, provincial and local electrical and building
regulations. We recommend that you consult a qualified electrician and a qualified plumber if
you have questions about anything relating to codes or regulations for this product.
This product is intended for household and indoor use only. Do not immerse in water.
The breaker used to power this unit must be grounded by means of the electrical panel.
The heater must be directly connected to dedicated circuit breakers on the main electrical
panel.
Do not install the heater where it may be subjected to direct sunlight, rain, splashing water,
moisture/humidity or freezing temperatures.
This unit is intended for heating water only. Do not attempt to use the unit for heating any
other kind of liquid.

2. About Your Black+ Decker Electric Tankless Water Heater

Congratulations on making the decision to purchase one of the best and finest Instant Water
Heaters currently available in the market today! Your new Instant Water Heater features advanced
water flow rate and temperature sensors which are designed to modulate power to the heating
elements to maintain a user-selected output water temperature range for 24kW / 27kW: 86°F
(30°C) to 122°F (50°C) (subject to the temperature of the incoming water).
WARNING: When selecting the water temperature setting of your Instant Water Heater's
thermostat, factors such as safety and energy conservation should be considered. Continuous
exposure of the skin to water temperatures above 120°F (49°C) can result in severe burns or
death. The maximum temperature to be set on this Instant Water Heater's thermostat is 122°F
(50°C). Always take precaution to feel the water before bathing or showering to make sure the
temperatures are not too hot. You are required to read and comply with the Time/Temperature
4
Relationship Chart on the following page to determine the right water temperature for your home.