Before You Start; Configuration - D-Link AC1900 Mode D'emploi

Masquer les pouces Voir aussi pour AC1900:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before you Start

• Users with DSL providers - If you are using a PPPoE connection, you will need
your PPPoE user name and password. If you do not have this information, contact
your Internet provider. Do not proceed until you have this information.
• Users with Cable providers - Make sure you unplug the power to your modem.
In some cases, you may need to turn it off for up to 5 minutes.

Configuration

There are two ways to configure your router:
A. D-Link Wi-Fi app - Use a mobile device with the D-Link Wi-Fi app.
B. Web Browser - Use a web browser from your computer. Refer to the Web
Browser Configuration section for more information.
A. D-Link Wi-Fi App Setup
Scan the code below or search "D-Link Wi-Fi App" (App Store or Google Play)
1
to download the D-Link Wi-Fi App to your iPhone, iPad, or Android device.
Once installed, launch the app. Please follow the on-screen instructions
2
to complete the setup.
Note: To reconnect to your router, launch your wireless utility, select the new
Wi-Fi Network you created, and then enter your new Wi-Fi password.
NOTE: If your DSL or cable modem uses a battery backup, when asked to unplug the power on
your modem, please remove the backup battery and ensure all lights are off on the modem.
Refer to the modem's user manual if required.
4
iOS
Android
D-Link Wi-Fi App

Publicité

Table des Matières
loading

Table des Matières