Batteryreplacement - koban KTIR-550 Manuel D'utilisation

KTIR-550
Non-Contact Infrared Thermometers
released.(Unless the unit is locked on)
Note: Measurement considerations
Holding the meter by its handle, point the IR Sensor
toward the object whose temperature is to be measured.
The meter automatically compensates for temperature
deviations from ambient temperature. Keep in mind that
it will take up to 30 minutes to adjust to wide ambient
temperatures are to be measured followed by high
temperature measurements,
minutes) is required after the low (and before the high)
temperature measurements are made.
This is a result of the cooling process, which must take
place for the IR sensor.
5. BATTERY REPLACEMENT
① As battery power is not
sufficient, LCD will display
" " replacement with
one new battery type 9V is
required.
14
some time (several
www.grupotemper.com