Running And Stopping; Viewing Measurements - TSI Quest SD-200 Manuel De L'utilisateur

4 Operating

Running and stopping

The run and stop keys are used to start and stop the Run-Time
measurements which include: L
Alert , M
1. While powered on, press

Note: While in run mode, the settings cannot be changed. (See "Settings" for
more information.)
2. To stop, press

Viewing measurements

The mode key is used to view each measurement screen with its related value.
There are six measurement screens: SPL (no measurement indicator), L
MAX*, MIN*, LED alert
occurred).
Measurement screen examples
(1) SPL screen (2) L
1
4
, and M screens.
AX IN
key. The
*, and Run-time
Integrating
Run indicator and L
Mode key
The mode key cycles through the measurements
/L (3) LED Alert
EQ AVG
Figure 1-5: Measurement screens
/L (see Table 1-2 for more information), LED
EQ AVG
key. The icon appears.
icon disappears.
* screens (*while integrating has
displayed
EQ
(4) M (5) M
AX
2
5
for integrating
(6) Run-Time
IN
3
6
/L ,
EQ AVG*